Created with Sketch. Created with Sketch.

P-System

The Lamello  P-System is an award-winning joining method. Clamex, Tenso and Divario connecting fittings make an entirely new level of flexibility, speed and simplicity possible throughout the design, manufacturing, transport and installation process. Created with the Zeta P2 power tool or a CNC.

Tenso P:  is an invisible self-clamping connector giving perfectly clamped joints, regardless of the angle of work pieces. Short assembly times without the need to wait for glue to dry. Minimal assembly force is required to snap the connectors into place.  

Clamex P: Detachable connectors can be opened and closed time and again via the integrated lever arm, making them ideal for transporting to site with connectors pre-installed. Versatile that the shallow element depth allows for mitres from 22.5 to 180 degrees

Divario: is a knockdown connector used for slide in shelves or partitions to assembled cabinets. This is an invisible connector which is quick to install without the need for glue due to its clamping effect.

  • Lamello P-System connector assortment set (basic) supplied in sortainer

    Lamello P-System Basic Connector Assortment in Sortainer

    The P-System from Lamello is an innovative and award-winning joining method. Clamex, Tenso and Bisco fittings allow for an entirely new level of flexibility, speed, and simplicity throughout your designs. Supplied in a sturdy Sortainer with T-loc and...

    £311.04 (Inc. VAT)
    £259.20 (Ex. VAT)
    Add to Cart
  • Tenso P-14 self-clamping connector for gluing materials from 15mm thickness The self-clamping gluing is ideal for carcasses, furniture, drawers, furniture fronts, and more

    Lamello Tenso P-14

    Tenso P-14 is a self-clamping glueing aid for materials from 15mm and is anchored in the form-locking P-System groove within seconds. The high clamping force of Tenso leads to perfectly clamped joints without the need for clamps or presses,...

    £64.46 (Inc. VAT)
    £53.72 (Ex. VAT)
    Choose Options
  • Tenso P-10 connectors allow for easy and quick assembly of thin materials with adhesive Ideal when attaching and gluing  thin panels, as particularly in the case of sensitive surfaces it makes gluing possible without clamps

    Lamello Tenso P-10 with Preload Clip

    Tenso P-10 is a self-clamping connector for materials from 12mm to glue and is anchored in the form-locking P-System groove within seconds. The high clamping force of Tenso leads to perfectly clamped joints without clamps or presses, regardless of the...

    £77.44 (Inc. VAT)
    £64.53 (Ex. VAT)
    Choose Options
  • Lamello Clamex P-14 detachable furniture connector Clamex P-14 enable time-saving bespoke furniture, from design to production and installation.

    Lamello Clamex P-14

    Clamex P-14 is a detachable connector for materials from 15mm and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6mm access hole, Clamex P-14 is firmly connected and disconnected using a lever. Clamex P-14...

    £107.89 (Inc. VAT)
    £89.91 (Ex. VAT)
    Choose Options
  • Lamello Clamex P-14/10 Flexus is a detachable furniture connector with flexible positioning pins Flexible positioning pins enable the tilting of the workpiece in both directions

    Lamello Clamex P-14/10 Flexus

    Clamex P-14/10 Flexus is a detachable furniture connector with flexible positioning pins and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6mm access hole, Clamex P-14/10 Flexus is firmly connected and...

    £107.89 (Inc. VAT)
    £89.91 (Ex. VAT)
    Choose Options
  • Clamex P-10 detachable furniture connector for materials from 12mm thickness Flexible for all angles and mitres, the Clamex P-10 does without glue or screws

    Lamello Clamex P-10

    Clamex P-10 is a detachable connector for materials from 12mm and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6mm access hole, Clamex P-10 is firmly connected and disconnected using a lever. Clamex P-10...

    £107.89 (Inc. VAT)
    £89.91 (Ex. VAT)
    Choose Options
  • Clamex P-14 Medius enables cross member joints to a central panels with thicknesses from 16mm Creatively design storage furniture using horizontal or vertical partitions

    Lamello Clamex P-14/10 Medius

    Clamex P-14/10 Medius is a detachable connector for furniture centre panels and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6mm access hole, Clamex P-14/10 Medius is firmly connected and disconnected using a...

    £107.89 (Inc. VAT)
    £89.91 (Ex. VAT)
    Choose Options
  • Bisco P-14 is a plastic biscuit for panels 18mm and over The Bisco serves to align the workpieces and fits into the P-System groove without the need to change cutters.

    Lamello Bisco P-14 (Box of 80)

    Bisco P-14 is a plastic biscuit for panels 18mm and over, which fits into the 7mm P-System groove and is held in the groove due to its surface structure. Bisco P-14 is used in combination with Clamex P-14 or Tenso P-14 as a cost-effective alignment...

    £24.61 (Inc. VAT)
    £20.51 (Ex. VAT)
    Add to Cart
  • Bisco P-10 is a plastic biscuit for panels less than 18mm Used in combination with Clamex P-10 or Tenso P-10 as a cost-effective alignment element

    Lamello Bisco P-10 (Box of 80)

    Bisco P-10 is a plastic biscuit for panels less than 18mm, which fits into the 7mm P-System groove and is held in the groove due to its surface structure. Bisco P-10 is used in combination with Clamex P-10 or Tenso P-10 as a cost-effective alignment...

    £22.28 (Inc. VAT)
    £18.57 (Ex. VAT)
    Add to Cart
  • Divario P-18 self-clamping system, invisible connector for slide insertion Divario: the ideal combination for shelves and dividers, enabling strong and invisible connections

    Divario P-18

    Divario P-18 is a detachable connector for slide-in insertion and is anchored in the form-locking P-System groove within seconds. The connector is used to slide shelves or partitions into an already assembed cabinet. In the process, the Divario P-18...

    £81.32 (Inc. VAT)
    £67.77 (Ex. VAT)
    Choose Options
  • Installation tool for inserting the Divario P-18 into the workpiece

    Lamello Divario P-18 Installation Tool

    12550 Installation tool for inserting the Divario P-18 in the workpiece. ⬇ Lamello P system brochure Insert the connector, position it and drive in the fixation pins Divario installation: Click here

    £81.85 (Inc. VAT)
    £68.21 (Ex. VAT)
    Add to Cart
  • Drilling jig for use with Lamello Clamex P-14 and P-10 fittings to access the integrated rotating lever arm

    Lamello Clamex P Drill Jig

    125344 Drilling jig for use with Lamello Clamex P-14 and P-10 fittings to access the integrated rotating lever arm. ⬇ Lamello P system brochure Includes ø 6mm spiral drill with centering point. Versatile on angled work from 22...

    £61.44 (Inc. VAT)
    £51.20 (Ex. VAT)
    Add to Cart
  • Lamello Zeta P2 Cordless Biscuit Joiner in Systainer

    The cordless Zeta P2 is the profile biscuit joiner for even faster joints, suitable for use with P-System connectors. It is used to create the form-locking P-System groove within seconds, and is even more flexible to use thanks to its battery drive. The...

    £1,501.20 (Inc. VAT)
    £1,251.00 (Ex. VAT)
    Choose Options
  • Disc groove cutter for serial production of the P-System connectors on a CNC machine

    Lamello CNC Diamond Groove Cutter for P-System

    132142 Disc groove cutter for CNC machine requires the diamond-tipped P-System cutter with tool opening 30mm. To cut P-System grooves in the work piece edge using an angle aggregate, a cutter arbor is used the dimensions of which vary according to the...

    £246.13 (Inc. VAT)
    £205.11 (Ex. VAT)
    Add to Cart
  • Diamond tipped blade or cutting the P-System groove in wood composite materials

    Lamello Zeta Diamond Groove Cutter for P-System

    132140 Diamond tipped blade or cutting the P-System groove in wood composite materials with the Lamello Zeta P2 power tool.  ⬇ Lamello P system brochure Recommended for MDF, chipboard and melamine faced chipboard. Cutter: ø 100.4 x 7 x...

    £192.78 (Inc. VAT)
    £160.65 (Ex. VAT)
    Add to Cart